Highlite Forum
advanced selection - Printable Version

+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Feature Requests (https://forum.highlite.com/forumdisplay.php?fid=38)
+--- Thread: advanced selection (/showthread.php?tid=1005)



advanced selection - gabe - 31-12-2020

hi, I've found extremely helpful various selection modes.Is possible to implement it ,in order to be able working with matrix selection? (yes, something like MAtricks )


RE: advanced selection - denishessberger - 04-01-2021

Hi Gabe,

can you be more precise?

Best,
Denis


RE: advanced selection - gabe - 18-02-2021

(04-01-2021, 09:25 AM)denishessberger Wrote: Hi Gabe,

can you be more precise?

Best,
Denis

yes, image to have many simple rgb cob in a matrix. will be useful to have a window where you can specify in how many rows and column your light are, then , with next and previous button, you can move inside column or row, select 2k and 2k+1 for every column, select [color=#202124][font=arial, sans-serif]oblique, etc etc[/font][/color]. 
I know something similar Is implemented, but it's very simple at the moment.
I hope that if you can store this matrix in a specific pool, you can in the future use stored matrix for very simple bitmaps.
regards Gabe.


RE: advanced selection - denishessberger - 18-02-2021

Hi Gabe,

thanks for the clarification!

currently there are no plans to implement anything like this. My prefered method would be to use a magicsheet for selection and store that into groups. Also you can already do a lot like that using the Modulo Syntax on the keypad, especially when combined with the MagicSheet Selection, eg:

On a 5 x 5 Grid:
If you select the fixtures in the MagicSheet top down first and then left right pressing [1] [/] [5] [Enter] will give you the first row, selecting left to right first this will give you column 1.
If you want the first and the last Column you can type [1] [+] [5] [/][5] [Enter], etc. For letters you could use the MagicSheet "Draw Selection" selection mode.

Best,
Denis