Highlite Forum
[Fixed in 1.02] Lampy 20, version 1.01, Cannot set pan fan from position preset - Printable Version

+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Showtec LAMPY (https://forum.highlite.com/forumdisplay.php?fid=48)
+--- Forum: LAMPY Bug Reports (https://forum.highlite.com/forumdisplay.php?fid=53)
+--- Thread: [Fixed in 1.02] Lampy 20, version 1.01, Cannot set pan fan from position preset (/showthread.php?tid=1010)



[Fixed in 1.02] Lampy 20, version 1.01, Cannot set pan fan from position preset - jjlinnemann - 14-01-2021

Type of the Desk: Lampy 20 with dongle

Software Version: 1.01

External Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen

Connected USB Devices: keyboard and mouse

Networked Devices: connected to LAN, DHCP

Description:
You cannot set fan for pan or tilt if you start from a position preset

Steps to reproduce:
- Select a few moving heads
- Select a position preset that includes pan and tilt values
- Press the fan button
- Select the Values home screen
- Now turn the Pan Fan encoder to fan the pan

Expected Behavior:
I would expect the pan to fan

Observed Behavior:
The pan does not fan initially. However, in the values screen, the tilt value changes from the preset to the raw value. If I then turn the Pan Fan encoder, the pan does fan. This bug only applies to the Pan Fan. If I change the Tilt Fan, it does work immediately.


RE: Lampy 20 with dongle, version 1.01, Cannot set pan fan from position preset - denishessberger - 14-01-2021

Hi there,

thank you for your report.

We can confirm this issue.

Denis