+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Showtec LAMPY (https://forum.highlite.com/forumdisplay.php?fid=48)
+--- Forum: LAMPY Bug Reports (https://forum.highlite.com/forumdisplay.php?fid=53)
+--- Thread: [Fixed in 1.02] Lampy 20, version 1.01, Encoders show fan options but cannot be set (/showthread.php?tid=1012)
[Fixed in 1.02] Lampy 20, version 1.01, Encoders show fan options but cannot be set - jjlinnemann - 14-01-2021
Type of the Desk: Lampy 20 with dongle
Software Version: 1.01
Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen
Connected USB Devices: keyboard and mouse
Networked Devices: connected to LAN, DHCP
Description: Fan options are indicated above the encoders, but cannot be set
Steps to reproduce:
- Select the Effects home screen
- Press the Fan button: the encoders now show fan options (like Grouping Fan, Direction Fan)
Observed Behavior:
If you have an effect set, parameters can be changed, but only by clicking the encoder and entering a value, not by turning the encoder. What you are changing are the effect parameters, however, not fan parameters.
RE: Lampy 20 with dongle, version 1.01, Encoders show fan options but they cannot be set - denishessberger - 15-01-2021
Hi There,
I can not reproduce that parameters like size min, size max, speed and offset can not be fanned; however I can reproduce that duty cycle, grouping, symmetric, direction also show the "Fan" label and can not be changed when fan is active. This is a bug in the user interface in regards to trying to fan these parameters, however these parameters can not be fanned.
I'll issue a ticket (#161).
Thanks for reporting these findings with us!
Denis