Highlite Forum
DEFAUT VALUE - Printable Version

+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Showtec LAMPY (https://forum.highlite.com/forumdisplay.php?fid=48)
+--- Forum: LAMPY Hardware (https://forum.highlite.com/forumdisplay.php?fid=51)
+--- Thread: DEFAUT VALUE (/showthread.php?tid=1035)

Pages: 1 2


Default Presets - DOUGS38 - 15-03-2021

peut on programmer  un preset position  choisi comme valeur par défaut pour éviter que les machines reviennent en position par défaut usine quand on vide le programmer lorsque l'on met un submaster off par exemple.
Cordialement


RE: POSITION PAR DEFAUT - denishessberger - 15-03-2021

Hi there,

I am very sorry - but I do not understand the post as I do not speak french and the official language of the forum is english Wink

From what Google translate says:
you can program a preset position chosen as default value to prevent the machines from returning to the factory default position when you empty the program when you put a submaster off for example.

This is not a bug report, but a feature request. A function like this however is not very likely to be implemented. Even the Chimp does not allow that functionality.
I'm moving this post to feature requests.

Denis


DEFAUT VALUE - DOUGS38 - 15-03-2021

I ask my question again in english, hoping to have an answer this time

Is there a way to designate a preset as default value like on grand ma2 or will this be possible in the near future ???


RE: DEFAUT VALUE - Ron - 15-03-2021

Hi Dougd38
It is not possible to use Presets for default values.
You can change the default value in the fixture library if that helps.


RE: DEFAUT VALUE - DOUGS38 - 15-03-2021

Thank you for your reply
Is it not possible to add this function, which seems very important to me, to the LAMPY console.
Modifying the default values in the library is tedious and being able to set default positions in line with the scene and the show very quickly is essential.


RE: DEFAUT VALUE - denishessberger - 16-03-2021

Hi Dougd38,

I already answered yesterday in here:
https://forum.highlite.com/thread-1034.html

I will merge this post with the other post, as it is a duplicate and as it is a feature request, it should be in the feature request section of the forum Smile

Denis


RE: DEFAUT VALUE - ZhangYue - 26-12-2022

(16-03-2021, 10:23 AM)denishessberger Wrote: Hi Dougd38,

I already answered yesterday in here:
https://forum.highlite.com/thread-1034.html

I will merge this post with the other post, as it is a duplicate and as it is a feature request, it should be in the feature request section of the forum Smile

Denis

Glad we discovered this duplicate.
____
lolbeans


RE: DEFAUT VALUE - quitzonsandy - 05-04-2023

Since it is a duplicate and a feature request, I will merge it with the other post and move it to the forum's feature request section.  





basketball stars


RE: Default Presets - tickengage - 25-07-2023

Il est possible de programmer un preset de position personnalisé pour éviter que les machines reviennent à leur position par défaut usine lorsque vous videz le programme ou lorsque vous désactivez un submaster. Cela peut être fait en utilisant une fonctionnalité appelée "Home Position" ou "Position de repos" sur la console d'éclairage geometry dash unblocked


RE: DEFAUT VALUE - reamtram - 11-08-2023

Oui, vous pouvez généralement définir une position prédéfinie par défaut pour empêcher les machines de réinitialiser ou de désactiver les sous-maîtres.
Cela nécessite d'utiliser les fonctions de programmation de votre console d'éclairage ou de contrôle. Les étapes dépendent de votre console d'éclairage ou du modèle d'équipement