Highlite Forum
Fixture fader (MFF) behaviour - Printable Version

+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Showtec LAMPY (https://forum.highlite.com/forumdisplay.php?fid=48)
+--- Forum: LAMPY Feature Requests (https://forum.highlite.com/forumdisplay.php?fid=54)
+--- Thread: Fixture fader (MFF) behaviour (/showthread.php?tid=1071)



Fixture fader (MFF) behaviour - LightDark - 03-05-2021

If a fixture has a value in a cue and that cue is being played back from a Playback and I open the corresponding Fixture fader (MFF) of that fixture, that fixture's intensity jumps to 0%, in 0 seconds. If I press the "Clear" button, it jumps in 0 seconds back to the value of that cue that is still being played back.

I would like the Fixture fader (MFF) to pick up the value that it has in that cue and take control, i.e. if that fixture is at 80%, I have to move the Fixture fader to 80% first to lower it from there.


RE: Fixture fader (MFF) behaviour - denishessberger - 03-05-2021

Hi Bastiaan,

let me check with the Development team if we have a way to do so with the current software architecture.

Best,
Denis


RE: Fixture fader (MFF) behaviour - LightDark - 05-05-2021

Hello Denis,
I am curious! :-)
All the best!
Bastiaan


RE: Fixture fader (MFF) behaviour - LightDark - 02-06-2021

Hi Dennis,
I am still curious Wink
Bastiaan