+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp General Questions (https://forum.highlite.com/forumdisplay.php?fid=47)
+--- Thread: unusual screen during startup (/showthread.php?tid=1076)
unusual screen during startup - Tom TK - 08-05-2021
Hi,
My console would not start directly to the chimp software, i have to connect a keyboard to press the F1 button to continue.
It says: UEFI Defaults have been loaded, Press F2 or DEL to Run Setup, Press F1 to Continue.
My Setup: Chimp 300 G.1 console, software version 1.12 beta, nothing connected but power.
The last thing i did was updating the software version to V1.12 Beta.
Any help would be appreciated.
Best regards,
Tom
RE: unusual screen during startup - denishessberger - 09-05-2021
Hi Tom,
it sounds like the bios battery is dead.
You can most easily change it yourself, it’s between the big heat sink on the mainboard and the ram.
I believe (top of the head) that it is a standard CR2032.
After, just load the default settings and you should be fine.
If you prefer to not do it yourself, I am sure you can give Highlite a call and they can let you know the steps to RMA.
Best,
Denis
RE: unusual screen during startup - Tom TK - 12-05-2021
Problem Solved!
Got a new battery and now it is back to normal.
Very easy to do so i did it myself.
I've got an image of the message so if someone have the same thing they know what to do ;-)
Thank you for your quick respond,
Best regards,
Tom
RE: unusual screen during startup - denishessberger - 13-05-2021
Great!
Thanks for the feedback!
Best,
Denis