+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Software Releases (https://forum.highlite.com/forumdisplay.php?fid=35)
+--- Thread: Software Release V2.0.6 (23-12-2021) (/showthread.php?tid=1246)
Software Release V2.0.6 (23-12-2021) - Ron - 23-12-2021
-------------------------------------------------------------------------------
Version 2.0.6
-------------------------------------------------------------------------------
This software contains a lot of bug fixes in order to improve on stability and reliability.
** Bugfixes **
- Clone Fixture Dialog: Allow to continue when not all source fixtures have destination fixtures assigned
- Color Picker should set auxiliary colors to 0
- Position/color attributes release before dimmer is released completely
- Default Mode when pressing set in Patch View (if nothing else was selected) should be to open Change Address Dialog
- Re-Patching fixtures miscalculates needed addresses in Select Address Dialog
- Patch: Automatic User ID lookup gets set to 1 if User Number Range 9xx has been used already.
- Is Used indicator in Preset Item is not Updated
- Channels column in Patch shows wrong channel counts
- Selecting "No Patch" when adding a Multicell fixtures results in Patch at 1-1
- Adding multiple Instances into a gap in another instances adds second and following instances after the gap
- Tracking + Track thru End does not work
- Editing an existing Cuelist CMD the wrong Cuelist is selected in the Edit Dialog
- Extend Library Auto-Build to Upload Nightly Libraries to Online Library Update Server
- Opening certain windows may crash client (Link Group Fader, Set Name from Edit Group, etc)
- Color Faders not working as expected with RGBxx fixtures
- Recording a range of dotted cues does not work
- BananaWing has wrong fader offset if sidekick is connected to OnPC
- Wrong preset seletion using keypad direct selection (ie. Preset 2.1)
- Programmer Set Value Dialog doesn't trigger buttons correctly
- Library Editor - Ranges seem to be broken
- Cuelist Priorities are only updated after switching off and restarting the Cuelist
- Renaming a fixture library creates a copy with new name instead of renaming.
- Proportional Range Button has no Text in ProgrammerSetValueDialog
- Editing a Fixture Library Range might duplicate it
- Deleting a Group should not change fixture selection
- Setting Appearance: if no color is set, clicking on the color picker should set the Intensity slider to 100%
- Changing a fixtures User Number does not udpdate sorting in Fixture Pool
- Changed Default Value in Fixture Library is not saved correctly with virtual dimmer fixtures.
- Preset loaded state gets lost when preset is moved.
- Storing Selection into Effect should check if effect parameter is supported by any fixture
- When deleting a Preset, Name, Icon and User Color should be reset.
** KNOWN ISSUES AND WORKAROUNDS **
Touchscreens cannot be calibrated, if an USB Mouse was attached while the console booted. To be able to calibrate your touchscreens:
o Shutdown the console
o Unplug the Mouse.
o Boot the Console
o Press Infinity + Open + S1 to calibrate the internal screen, or Infinity + Open + S2 to calibrate the secondary screen.
o After the calibration is done, you may attach keyboard and mouse again.
Fixture Libraries exported from pre-2.x Versions can not be imported using the Import function in the Library Window (Failed to import library file. No file signature found). Please use the following workaround:
o Import the Fixtures into a pre 2.0 showfile’s show library (e.g., Version 1.12) – this may also be done from within an OnPC
o Save and export the show. You may now open the Show in Software Version 2.0 and later including the fixtures. From now on, Library Exports and Imports will keep working.