Highlite Forum
ADJ Focus Spot 6Z not working - Printable Version

+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Fixture Libraries (https://forum.highlite.com/forumdisplay.php?fid=36)
+--- Thread: ADJ Focus Spot 6Z not working (/showthread.php?tid=1350)



ADJ Focus Spot 6Z not working - julianhaertel - 19-07-2022

Hello, everyone,

I am working with the ADJ FOcus Spot 6Z and the fixtures are not correct. I installed the latest version.
The instructions can be viewed at the following link:
http://adjmedia.s3-website-eu-west-1.amazonaws.com/manuals/ADJ%20Focus%20Spot%206Z%20-%20User%20Manual.pdf

I would like to use the lamps in the highest channel mode.

Thank you!


RE: ADJ Focus Spot 6Z not working - julianhaertel - 19-07-2022

Specific errors:

The three channel modes are according to lamp 21,25,29.
In the fixture it is 20,24,20.

Sometimes the number doesn't match, so something must be wrong. Somehow the patched fixtures overlap when they are back to back.


RE: ADJ Focus Spot 6Z not working - denishessberger - 14-10-2022

Hi, thanks! We'll look into this.


RE: ADJ Focus Spot 6Z not working - victorpatrick - 03-01-2024

Hello, many thanks! We'll investigate this. bitlife


RE: ADJ Focus Spot 6Z not working - kalyl - 05-01-2024

Your writing demonstrates a high level of expertise suika game and professionalism.


RE: ADJ Focus Spot 6Z not working - Russonaftig - 29-02-2024

This inconsistency could be causing issues, especially if the patched fixtures are overlapping when placed back to back.
geometry dash unblocked
To troubleshoot this issue, it's essential to double-check the specifications provided for both the lamps and fixtures. Ensure that the channel modes are correctly configured and aligned between the two components. Additionally, consider consulting the user manuals or technical documentation for the lamps and fixtures to confirm the correct channel modes and settings.