+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp General Questions (https://forum.highlite.com/forumdisplay.php?fid=47)
+--- Thread: Preset/Cuelists (/showthread.php?tid=234)
Preset/Cuelists - Steve_Mutter - 09-09-2018
I got an Problem in following Situation an think its a bug:
- Stored Presets at "All Preset" Page
- Selecting Fixture -> Selecting Preset from "All Preset" Page -> Record to Fader
- Now Clearing everything with 3x Clear but the Preset from "All Preset Pages" stays in Green Color (Only Background
Color, no Output)
- When I hit the "OFF" Key and selecting "OFF Window" and hit "Cancel" the Green Background turn off
Second Problem makes the Desk unusable if its a bug and im not wrong.
- I store 2 Dimmers in 1 Cuelist (2 seperate Fixtures!)
- First step Dimmer 1 to 100% -> Record to Fader 1
- Clear, Clear, Clear
- Second step Dimmer 2 to 100% -> Record to Fader 1 -> Append as new Cue
- Clear, Clear, Clear
- Now if I activate the Cuelist by sliding the Fader upwards the First Cue will start correctly
- Now I am skiping to second Cue but Cue 1 won't stop!
Usually only the selected Cue should be active or I'm wrong?
Please Help
P.S. Software Version 1.07
RE: Preset/Cuelists - MSteger - 10-09-2018
You have to set Fixture 1 @0 in the second cue? If not it will keep @Full until a Cue says @0
RE: Preset/Cuelists - denishessberger - 10-09-2018
Please have a look at the section about tracking in the User Manual.
RE: Preset/Cuelists - WesleyHouben - 12-09-2018
Hi all,
Hit softkey of the cuelist and enter the edit list menu. Please make shure tracking is disabled.
Cheers