+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Hardware (https://forum.highlite.com/forumdisplay.php?fid=34)
+--- Thread: Universe 4 Out port broken (/showthread.php?tid=358)
Universe 4 Out port broken - eirikhelgesen - 05-03-2019
Hello! The Universe 4 port on my Chimp 300 dont work. Any fixses for this?
RE: Universe 4 Out port broken - Ron - 07-03-2019
Dear Eirikhelgesen,
if your console is under waranty, I would strongly suggest to send back the unit to your local dealer or to Highlite if you have a customer account.
they can repair and do a thorough check-up.
in case you would want to do it yourselves, then all 4 universes are seperate PCB's which are very easy to exchange.
so if you are 100% sure that the problem is only the PCB, then ordering this spare-part and loosening some screws will be the work you need to do.
hope this info helps.
RE: Universe 4 Out port broken - replay - 12-03-2019
Also, make sure that the DMX input is switched off. If it is On and assigned to DMX output 4, the output won't work.