+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Tips and Tricks (https://forum.highlite.com/forumdisplay.php?fid=40)
+--- Thread: General Hotkeys (/showthread.php?tid=7)
General Hotkeys - Ron - 02-08-2017
Hi all,
with this post I would like to share some general hotkeys which makes life more easy for all of us:
[size=small][Infinity] + [Open] + [S1] = start calibrating internal screen (or first screen)[/size]
[Infinity] + [Open] + [S2] = start calibrating external screen (or second screen)
[Infinity] + [Open] + [S4] = restart the GUI interface.
[Infinity] + [Open] = closing the currently active Window on the internal
[Infinity] + [Page Up] = takes you back to fader or executor page 1
[Infinity] + [Off] = Release all Cuelists, clear Programmer and reset all Fader values back to 100%
[Off] + [Cuelist] xx = Release Cuelists xx
[Infinity] + [Preset] = Copy Preset contents for all selected fixtures to programmer instead of linking to preset
[Infinity] + [Clear] = Will revert back to the last programmer state (Unclear Programmer)
[Infinity] + [Last] = Will deselect all fixtures
[Infinity] + [Next] = Will select all fixtures (of the current selection set, if applicable)
Hold [Infinity] Will show fine values in programmer and allows for fine adjustment of parameters using the encoders.
Hold [Fan] key automatically switches off the fan when button is released
[Infinity] + [Load] is a hotkey to load the current output on stage of the selected fixtures into the programmer. This function is similar to the record “All for Selected” function, but it doesn't store the result into a Cue. Instead it loads the result into the Programmer for further editing.
Dimmer shortcuts on the number block:
[@] [Full] = dimmer to 100%
[Full] = dimmer to 100%
[@] [@] = dimmer to 100%
[@] 75 = dimmer to 75%
[@] [.] 75 = dimmer to DMX value 75
[+] [+] = increase dimmer by 10%
[-] [-] = decrease dimmer by 10%
[.] [.] = dimmer to 0%