+- Highlite Forum (https://forum.highlite.com)
+-- Forum: Infinity Chimp (https://forum.highlite.com/forumdisplay.php?fid=46)
+--- Forum: Chimp Feature Requests (https://forum.highlite.com/forumdisplay.php?fid=38)
+--- Thread: [Done 2.1] Time palette (/showthread.php?tid=787)
[Done 2.1] Time palette - gabe - 09-04-2020
Hi, is possible in v 1.11 store a timing preset/palette?(of course only modified ones)like normal parameters?
If no can you implement this? Imagine to get different preset with left to right or center out timing.. and then choose different presets .
Of course dim timing->dim preset
POS timing->pos preset
.
.
.
Regards Gabe
RE: Time palette - gabe - 09-04-2020
Hi guys, again me.
I have some news about this thread.
I've tried to create some timing presets and yes, it work...but...
-you can't store timing only, even when you try , chimp automatically add dmx value in your preset where timing has been modified.
-if you store fade time in your preset it will not work if you recall it in live, but delay yes. so you have to create presets for delay and use live fade special master to get (e.g. in to out)transaction.
hope.you guys will fix/update this, and in meanwhile I'll post a video to show this missing feature/bug and to show what I want to get.
p.s. i've not tested put timing in cue and not in presets.
.
.
link to video: https://www.facebook.com/gabry575/videos/3397302913632283/
.
.
Gabe
RE: Time palette - denishessberger - 14-04-2020
Hi Gabe,
as I already mentioned on Facebook storing timing into presets or creating timing only presets is not supported at the moment. Also please note that your other discovery with putting times and values into two different cuelists may or may not break at some point going further in development; especially with multicell.
However: Please keep up your work with the chimp and asking questions or asking for features - it helps moving the product forward and listening is the only way to make it better
Best,
Denis
RE: Time palette - denishessberger - 23-04-2022
We have added "Pure Timing Presets" in v2.1
RE: [Done 2.1] Time palette - dd-dietrich - 24-04-2022
Thanks for the possibility, but how can i create them?
I alredy tried to get only timing information in the attributes of the programmer, but at the moment i select a timing it also sets the parameter active and if i set the parameter to off the timing does so too.
Best regards
RE: [Done 2.1] Time palette - denishessberger - 26-04-2022
Edit -> Preset and tick the „Pure Timing Preset“ Checkbox
RE: [Done 2.1] Time palette - sneaker - 22-05-2022
Ich habe das mal testen wollen, jedoch funktioniert das bei mir nicht. Es werden immer auch die Farbwerte mit in das Preset geschrieben. So habe ich das erstellt:
- ich wähle die Geräte und gehe auf Color
- dort wähle ich Timing und stelle meine Delayzeiten ein
- Store als Preset und dann Edit Preset und setzte den Hacken Pure Timing Preset
Wenn ich das Preset dann aktiviere passiert bei der Auswahl eines Farbcues nichts mit einem Delay, es schaltet einfach um. Wenn ich das dann Preset deaktiviere gehen alle Lampen mit dem Delay aus.
Wenn ich das Preset in den Prorgammer lade, steht auch in RBG überall 0 drin.
Was mache ich hier falsch?