Hello There, Guest! Login Register
[Fixed in 1.02] Lampy 20, version 1.01, Cannot set pan fan from position preset



14-01-2021, 10:17 AM #1
jjlinnemann Offline Newbie *
Posts:2 Threads:2 Joined:Jan 2021
Type of the Desk: Lampy 20 with dongle

Software Version: 1.01

External Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen

Connected USB Devices: keyboard and mouse

Networked Devices: connected to LAN, DHCP

Description:
You cannot set fan for pan or tilt if you start from a position preset

Steps to reproduce:
- Select a few moving heads
- Select a position preset that includes pan and tilt values
- Press the fan button
- Select the Values home screen
- Now turn the Pan Fan encoder to fan the pan

Expected Behavior:
I would expect the pan to fan

Observed Behavior:
The pan does not fan initially. However, in the values screen, the tilt value changes from the preset to the raw value. If I then turn the Pan Fan encoder, the pan does fan. This bug only applies to the Pan Fan. If I change the Tilt Fan, it does work immediately.

14-01-2021, 10:43 AM #2
denishessberger Offline Posting Freak *****
Posts:295 Threads:10 Joined:Aug 2018
Hi there,

thank you for your report.

We can confirm this issue.

Denis






Forum Jump:


Users browsing this thread:2 Guest(s)