Hello There, Guest! Login Register
Clockwise v Counter Clockwise

17-11-2017, 09:21 AM #1
Hans Offline Member ***
Posts:38 Threads:11 Joined:Oct 2017

Did someone noticed, that for example a pan/tilt effect engine "circle" , when you chose cw it will turn ccw and when ccw it will cw ? 
Or is my mistake and should it be seen from the fixture side and not from front?

24-11-2017, 06:02 PM #2
Ron Offline Administrator *******
Posts:87 Threads:25 Joined:Aug 2017
Hi Hans,

for sure depending on the brand, pan/tilt movements will vary in rotation.
and also rotation will change depending on orientation of your fixtures.

if you want to correct this, then please invert the pan/tilt in your show settings :-)

have a nice weekend

Feed your Chimp, Keep Calm or go Banana's!!

Best regards,  Ron

11-09-2020, 01:44 PM #3
denishessberger Offline Senior Member ****
Posts:121 Threads:3 Joined:Aug 2018
Ron is very right on this one Smile

CW / CCW should be fine when:

You select the fixtures, turn the tilt encoder to the right and they move towards FOH (with PAN at 0°)
You select the fixtures, turn the pan encoder to the right and they move towards House Right (with TILT higher than 0°)


Forum Jump:

Users browsing this thread:1 Guest(s)