[fixed 2.06] Bug 2.05 - Color Faders with RGBAL fixture - Red not working as expected

[denishessberger]

Software Version: 2.0.5
OnPC / Chimp 100 / Chimp 300

Steps to reproduce

- Start a new Show
- Add and Patch a Futurelight EYE-7 HCL in Standard Mode
- Select the Fixture
- Go to Programming Screen
- In Programmer, select the Color Attribute Group
- Change to Color Faders
- Move Blue Fader up and down, then green Fader Up and Down, then Red Fader Up to 100%

Expected Behaviour: 
The Color Picker sets the Red Channel to 100%

Observed Behaviour:
The Color Picker sets the green channel to 100%

Additional Information:

Setting all RGB Faders to 100 % should output:

Red: 100%
Amber 0%
Lime: 0%
Green: 100%
Blue: 100% 

but it outputs

Red: 0%
Amber 100%
Lime: 0%
Green: 25%
Blue: 100%

[denishessberger]

This issue has ticket #644 in our internal system.

[aliacacia]

Adjust the faders to mix colors and see if red appears when combined with other colors. This can help determine if the problem is isolated to the red channel Connections Unlimited or affects other colors as well.

[LouLockman]

To adjust or fix this problem, please visit the page Uno Online for more information and details.