Login

leandermortiers · (This post was last modified: 21-09-2019, 02:20 PM by leandermortiers.)

Version 1.10 (10.04.2019)

This update extends the Infinity Chimp series by a PC Simulator Software.

New Feature: OnPc Version

The OnPc Version comes as a runnable VMWare image and will thus run under Windows as well as Mac OS. We recommend at least a
Core i 5 CPU (2017 or newer) with 86B of Ram. The virtual machine will need at least 2 Cores and 4GB of RAM.

The OnPc Version will display the Chimp Screen Content in individual windows. Due to the Full-HD resolution of the Chimp
touchscreens we recommend a minimum resolution of 2560x1440 for using the OnPc .
If the computer running the OnPC has a smaller resolution then some windows might not fully fit into the available screen size.
As a helper it is possible to move windows around by holding the keyboards "AL T" key and clicking in the background of the
window.

The OnPC Version will be able to interface with the Banana Wing turning the OnPc into a small take-away console. The Banana Wing
will unlock 2 universes of ArtNet and DMX for the OnPC.

Bugfixes:
- Fixed active DHCP setting blocking boot process, if no network cable is plugged in

MSteger · 23-09-2019, 05:11 PM

Where is the 1.10 downloadable?
Thanks Martin

leandermortiers · 23-09-2019, 05:42 PM

(23-09-2019, 05:11 PM)MSteger Wrote: Where is the 1.10 downloadable?
Thanks Martin

Hi Martin,

You can download the update through Online Update on the console. It is not (yet) downloadable via the Highlite website.

Bunteslicht · 23-09-2019, 08:09 PM

MULTIFIXTURES ???

leandermortiers · 23-09-2019, 08:15 PM

(23-09-2019, 08:09 PM)Bunteslicht Wrote: MULTIFIXTURES ???

Nope. In this update no multifixtures function yet. Only support for a OnPc version and a bugfix for DHCP.

Bunteslicht · 23-09-2019, 09:16 PM

buuhhaaaarrrr thats very disappointing.....

That is a very important point, not only for me. I think a on PC Version is not so importend than a good an extensive firmware for the uers with a Hardware Console they have pay a lot off money for the stuff.

And a current Forum, that i can download the firmware here and not only over the online update. Not every storehouse have internet.

Hope the next update will bring the multifixtures and we must not wait soooo long for it.

(23-09-2019, 08:15 PM)leandermortiers Wrote:
(23-09-2019, 08:09 PM)Bunteslicht Wrote: MULTIFIXTURES ???
Nope. In this update no multifixtures function yet. Only support for a OnPc version and a bugfix for DHCP.

mkostas · 24-09-2019, 02:17 PM

I have install the Update 1,10 on my Chimp 100 G2 but the with DHCP still exist...