hi,
tracking feature is very powerful, an it works great, but there are some missing feature that should be added :
-BREAK option ->selectable flag for the cue that say to chimp "hey, this is last cue following this sets of tracked cue, the next will tracking nothing".
in this way we can program new stage look from scratch .
example: ---- |DIMMER| R | G | B |
--------------cueN | 255 | 100 | 255 | 30 | <-BREAK
----------cueN+1 | ---- | ---- | ----- | -- | <-HERE WE CAN STORE NEW VALUES
-CUE ONLY option -> Another flag for cues. cues with this flag enabled should ignore tracking from previous cue ,but restore it in the next one.
example: ---- |DIMMER| R | G | B |
------------cue1 | 255 | 100 | 255 | 30 | <-STORED VALUE
------------cue2 | 127 | 255 | 0 | 70 | <-CUE ONLY
-----------cue3 | 255 | 100 | 255 | 30 | <-RESTORE TRACKING FROM CUE 1
ADD CUE CONTENT WINDOW.
Is important to see what's inside a cue.
this window could be table based view with heads on row and parameters on column (e.g. tables written in this post).
ability to change cue contents working on this table without load all cue in programmer.
TRACKING ON CUE CONTENT VIEW
every parameter on this cue content windows should be colored differently : e.g.
green->values is higher than previous one.
red->values is lower than previous one.
magenta ->values tracked.
blue->cue only.
tracking feature is very powerful, an it works great, but there are some missing feature that should be added :
-BREAK option ->selectable flag for the cue that say to chimp "hey, this is last cue following this sets of tracked cue, the next will tracking nothing".
in this way we can program new stage look from scratch .
example: ---- |DIMMER| R | G | B |
--------------cueN | 255 | 100 | 255 | 30 | <-BREAK
----------cueN+1 | ---- | ---- | ----- | -- | <-HERE WE CAN STORE NEW VALUES
-CUE ONLY option -> Another flag for cues. cues with this flag enabled should ignore tracking from previous cue ,but restore it in the next one.
example: ---- |DIMMER| R | G | B |
------------cue1 | 255 | 100 | 255 | 30 | <-STORED VALUE
------------cue2 | 127 | 255 | 0 | 70 | <-CUE ONLY
-----------cue3 | 255 | 100 | 255 | 30 | <-RESTORE TRACKING FROM CUE 1
ADD CUE CONTENT WINDOW.
Is important to see what's inside a cue.
this window could be table based view with heads on row and parameters on column (e.g. tables written in this post).
ability to change cue contents working on this table without load all cue in programmer.
TRACKING ON CUE CONTENT VIEW
every parameter on this cue content windows should be colored differently : e.g.
green->values is higher than previous one.
red->values is lower than previous one.
magenta ->values tracked.
blue->cue only.