Posts: 44
Threads: 14
Joined: Oct 2017
Hi,
I noticed, when I remove or stack a USB device (stick, mouse, keyboard) my gui reset.
It's not once, but al the time, since I've updated yo 2.1.0
I'm the owner of a chimp 300 G1.
Posts: 369
Threads: 10
Joined: Aug 2018
Hi Hans,
can you elaborate on what you mean when you say "The GUI Resets"?
Can you maybe post a video?
Best,
Denis
Posts: 44
Threads: 14
Joined: Oct 2017
(04-05-2022, 04:04 PM)denishessberger Wrote: Hi Hans,
can you elaborate on what you mean when you say "The GUI Resets"?
Can you maybe post a video?
Best,
Denis
Hi,
Gui= UI.
Since I installed the v2.1, often my UI resets/restart, when I (dis)connect a USB device.
The chimp itself keeps on running.
I used a Chimp 300 G1.
Posts: 369
Threads: 10
Joined: Aug 2018
Thanks for the clarification.
Does it really restart (eg you see the start screen again) or does it come back to the view you had before?
That the screen blacks out for a brief moment is actually somewhat expected - the software gets the same signal from the operating system when a screen or a usb device is attached - and unfortunately our hands are a little tied with that. However it should always go back to your previous view.
