Booting Utils
#1
Hi, I was wondering what are the maintenance utils when booting up the console and how can I access them. 

Also the other day our lampy didnt boot up so we opened it up and found the power supply cable disconnected, after connecting it again we were wondering where is the linux based sys os stored in the lampy. It was a normal computer with a normal motherboard and everything but a part from the DNGL usb stick we didnt found any ssd or hardrive. Can we, the Lampy Users, have an answers about it I would love to create some plugins to better use our controller. TY
Reply

#2
[color=#545454][font=Helvetica, 'Nimbus Sans L', Arial, 'Liberation Sans', sans-serif]Taking time to reflect on your own can help you to learn from the tunnel rush experience.[/font][/color]
Reply

#3
Creating plugins for better controller use heic to jpg  sounds like a great idea, and understanding the underlying technology will definitely be helpful in your development process.
Reply

#4
It sounds like a wonderful concept to build plugins for better controller use of heic to jpg, and knowing the underlying technology will help you in the development process. tunnel rush
Reply

#5
Building plugins for better controller use of heic to geometry dash jpg sounds like a fantastic idea, and understanding the underlying technology will aid you in the development process.
Reply

#6
If the machine is part of a NIM environment, you can enter maintenance mode directly by enabling the maint_boot operation for a NIM standalone machine. wordle 2
Reply

#7
I also encountered this problem before and it took me a wordle lot of time to fix this problem. I saw some video sharing on Youtube and you can go there to search for it. Hope this will be useful to you.
Reply

#8
To access maintenance utilities when booting your console, typically press F2, F12, or Del at startup. For your lampy, the Linux-based OS might be on a DNGL USB stick since no SSD or hard drive was found. Explore the USB stick for OS files to develop plugins. BSI discount codes
Reply

#9
Well, now this is an odd thread...
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)