27-09-2021, 12:14 PM
As you can see in the video in the follow link ( https://drive.google.com/file/d/1JZxwttm...sp=sharing ) there is a bug while i'm trying to create an effect and replace the effect fixtures.
Desk: Chimp 100G2 Tourpack
Software Version: 2.05
Step 1. Select Fixture (in my case is a multifixture)
Step 2. Add a Dimmer Pulse Effect
Step 3. Deselect the 1st Module of multifixture
Step 4. Store the Selected fixtures into effect
now you will see that the first module is keeping the effect and dont release it even if you will clear the programmer.
the only way to stop doing this is to reboot the console.
i also tried to Restart User Interface ([Infinity] + [Open] + [S4]) but nothing changed.
Desk: Chimp 100G2 Tourpack
Software Version: 2.05
Step 1. Select Fixture (in my case is a multifixture)
Step 2. Add a Dimmer Pulse Effect
Step 3. Deselect the 1st Module of multifixture
Step 4. Store the Selected fixtures into effect
now you will see that the first module is keeping the effect and dont release it even if you will clear the programmer.
the only way to stop doing this is to reboot the console.
i also tried to Restart User Interface ([Infinity] + [Open] + [S4]) but nothing changed.