It would be great to have the possibility to change the name for the master faders. Having 3 FX size masters always requires marking tape to know WHAT is controlled by the master…
Same applies to fade masters, and so on…
Interestingly it is already possible to use the naming function on master faders, but the entered name is neither shown nor saved.

Hi!
Is there any chance to connect the Chimp onPC Software with some kind of visualisation software without the need of additional hardware? That would be extremely handy for pre programming on the road or at home where I don't have the possibility to set up a console.

Hi chimps, 
I couldn't found those fixture in the library, so after this question put on the Facebook page , I tryed to make my own fixture,.  But It doesn't work at the way it schould be.. (I guess) When I created it I see 5 Fixtures (4x dimmer, 1x Shutter) why is my shutter not hided and when I take a n other multiple fixture for tamplate, I can't save it, the  "dimmer" stays red. 
So my question:
How can I create a multi fixture (4x dim, 1x shutter) and see only 4 fixture in my show?  (without the shutter as a separate fixture)
or
How can I update the Library, there's no link at the Highlite site and you have  a acount at the Altabase site?

With all regards,

Hans

Hi! 
Is there a easy way to get these modes for lampy. I attached cameos own info on how the channels are configured.

Attached Files

  CLPIXBAR600PRO_Cameo_DMX_Control_Table (1).pdf (Size: 78,18 KB / Downloads: 4)

I'm going to have an event next on sunday with 16 P9 from JB. Is the fixture already in the libary as it is pretty new?
JB supplies a GDTF file on the website -> https://www.jb-lighting.de/P9Spot

BR 
Moritz

Hi there,
a direct goto cue action inside the cuelist view without the need to select the cuelist and use the goto command would be nice

Hello, Feture request: Make flash button usable as blackout button. If the fader was selected as a dimmer then the flash button could also be used as a blackout button.
Hallo, Feture request: Flash Button als Blackout Taster benutzbar machen. Wenn der Fader als Dimmer ausgewählt wurde das man dann den Flash Taster auch als Blackout Taster benutzen könnte. Nicht als Off sondern als Blackout.

Hi there,
changing a channel's parameter sets the entire line to its default. The result is that the ranges are also deleted. Creating them new is tedious. I would like the other columns in the row to keep their current values.
Many thanks

I would like to have the option to change channel names in the fixture editor.
For example, if the channel type you need isn't present in the editor pool (like for example "autofocus 2"), you have to use one of the special channel, and with the option to rename the special channel to whatever channel you want it to be (in this case "autofocus 2"), it would be more easier to select and control these channels in live situations.

Type of the Desk: LAMPY 20 2U
Software Version: 1.03

No external Display

Connected USB Devices: 3
Networked Devices: Router and NET 2/3 Pocket

Short Description:
1. When adding freshly patched fixtures to one of the magic sheets, when klicking on cancel after selecting a arrangement option, all other/earlier added fixtures will be deleted from the sheet.

2. It's not possible to set the PAN/TILT area in degrees with the encoders in the fixture editor when creating a user fixture (as described in the GB version of the manual, page 87).

Steps to reproduce:
1. Add some fixtures to one of the sheets. Then patch new fixtures, select an arrangement, select the sheet with the other fixtures and when the freshly patched fixtures are shown on the sheet ready to be arranged klick on cancel instead of confirm.

2. Create a new fixture and in the "General Settings" tab of the fixture try to set a PAN/TILT range with the encoders.

Expected Behaviour:
I expect the fixtures on the sheet would not be deleted as it's time consuming if I have to add the fixtures again, especially in larger/bigger setups. Furthermore I wish to set the ranges for PAN/TILT so I can program my moving lights more precisely.