Type of the Desk: LAMPY 20 2U
Software Version: 1.03

No external Display

Connected USB Devices: 3
Networked Devices: Router and NET 2/3 Pocket

Short Description:
1. When adding freshly patched fixtures to one of the magic sheets, when klicking on cancel after selecting a arrangement option, all other/earlier added fixtures will be deleted from the sheet.

2. It's not possible to set the PAN/TILT area in degrees with the encoders in the fixture editor when creating a user fixture (as described in the GB version of the manual, page 87).

Steps to reproduce:
1. Add some fixtures to one of the sheets. Then patch new fixtures, select an arrangement, select the sheet with the other fixtures and when the freshly patched fixtures are shown on the sheet ready to be arranged klick on cancel instead of confirm.

2. Create a new fixture and in the "General Settings" tab of the fixture try to set a PAN/TILT range with the encoders.

Expected Behaviour:
I expect the fixtures on the sheet would not be deleted as it's time consuming if I have to add the fixtures again, especially in larger/bigger setups. Furthermore I wish to set the ranges for PAN/TILT so I can program my moving lights more precisely.

Hello All, 

Just a few questions, 
1) I can get TouchOSC talking to a chimp 300 console but for some reason when I’ve downloaded the Osc template from the website it downloads in .xml format and I can’t find the template on the TouchOSC app. Can anyone assist? 

2) on power up my playbacks are coming on at Dim 100%. The stack isn’t active but I currently have to force the playbacks to active to bring dim to 0%. This is on every playback.

Thanks in advance

-------------------------------------------------------------------------------
Version 2.0.6
-------------------------------------------------------------------------------

This software contains a lot of bug fixes in order to improve on stability and reliability.

** Bugfixes **

- Clone Fixture Dialog: Allow to continue when not all source fixtures have destination fixtures assigned
- Color Picker should set auxiliary colors to 0
- Position/color attributes release before dimmer is released completely
- Default Mode when pressing set in Patch View (if nothing else was selected) should be to open Change Address Dialog
- Re-Patching fixtures miscalculates needed addresses in Select Address Dialog
- Patch: Automatic User ID lookup gets set to 1 if User Number Range 9xx has been used already.
- Is Used indicator in Preset Item is not Updated
- Channels column in Patch shows wrong channel counts
- Selecting "No Patch" when adding a Multicell fixtures results in Patch at 1-1
- Adding multiple Instances into a gap in another instances adds second and following instances after the gap
- Tracking + Track thru End does not work
- Editing an existing Cuelist CMD the wrong Cuelist is selected in the Edit Dialog
- Extend Library Auto-Build to Upload Nightly Libraries to Online Library Update Server
- Opening certain windows may crash client (Link Group Fader, Set Name from Edit Group, etc)
- Color Faders not working as expected with RGBxx fixtures
- Recording a range of dotted cues does not work
- BananaWing has wrong fader offset if sidekick is connected to OnPC
- Wrong preset seletion using keypad direct selection (ie. Preset 2.1)
- Programmer Set Value Dialog doesn't trigger buttons correctly
- Library Editor - Ranges seem to be broken
- Cuelist Priorities are only updated after switching off  and restarting the Cuelist
- Renaming a fixture library creates a copy with new name instead of renaming.
- Proportional Range Button has no Text in ProgrammerSetValueDialog
- Editing a Fixture Library Range might duplicate it
- Deleting a Group should not change fixture selection
- Setting Appearance: if no color is set, clicking on the color picker should set the Intensity slider to 100%
- Changing a fixtures User Number does not udpdate sorting in Fixture Pool
- Changed Default Value in Fixture Library is not saved correctly with virtual dimmer fixtures.
- Preset loaded state gets lost when preset is moved.
- Storing Selection into Effect should check if effect parameter is supported by any fixture
- When deleting a Preset, Name, Icon and User Color should be reset.

** KNOWN ISSUES AND WORKAROUNDS **

Touchscreens cannot be calibrated, if an USB Mouse was attached while the console booted. To be able to calibrate your touchscreens:
    o Shutdown the console
    o Unplug the Mouse.
    o Boot the Console
    o Press Infinity + Open + S1 to calibrate the internal screen, or Infinity + Open + S2 to calibrate the secondary screen.
    o After the calibration is done, you may attach keyboard and mouse again.

Fixture Libraries exported from pre-2.x Versions can not be imported using the Import function in the Library Window (Failed to import library file. No file signature found). Please use the following workaround:
    o Import the Fixtures into a pre 2.0 showfile’s show library (e.g., Version 1.12) – this may also be done from within an OnPC
    o Save and export the show. You may now open the Show in Software Version 2.0 and later including the fixtures. From now on, Library Exports and Imports will keep working.

Hi guys, 

I’m a relatively new user to the chimp. Just a request for a future release. Is there a possibility you can add default positions as a field in patch or a recordable option? 

Currently the only way I can see to have the heads at a default position is by programming a 0% intensity cue with position info.

Fixture-file from the Showtec Shark Combi Spot for the Chimp V2.0.5 
(20 Channel mode)

Unzip the file and copy it on an USB-stick into the directory: \infinity\library

Attached Files

  Shark_Combi_spot(20CH).zip (Size: 1,98 KB / Downloads: 1)

Sorry das ich auf deutsch schreibe aber mein englisch reicht nicht um meine frage zu stellen - also es geht um den MH K10 habe mir color presets angelegt erstmal für die faben als wash soweit alles gut dann presets für den background und für die sharps leider überschreiben sich die color presets - was ich möchte im life betrieb den BG color und die shape farbe frei zu wählen warscheinlich denke ich gerade vollkommen falsch oder stehe neben mir - würde mich freuen wenn da jemand was zu schreiben könnte noch ne frage am rande bekommt ihr in capture die shapes auch nicht dargestellt - danke für eine antwort

Fixture file for the ETEC-200 (18CH mode)

Please unzip this file and copy it into the folder \showtec\library

You can import it in the User-library from the Lampy.

Attached Files

  ETEC_E200(18CH).zip (Size: 1,63 KB / Downloads: 5)

Would be great to have a possibility to name the mutual release groups. And even greater would it be to be able to freely create additional mutual release groups!

When I have a cuelist with two cues I expected the run mode "Release at End" to behave like this:
Execute Cue 1 -> Press GO -> Execute Cue 2 -> Press GO -> Cuelist is released
instead it behaves like this: 
[color=#000000][size=medium][font=Times New Roman]Execute Cue 1 -> Press GO -> Execute Cue 2 -> Cuelist is released immediately[/font][/size][/color]
[size=medium]Seems to be wrong as the manual states: Release at End - The Cuelist will release (Switch off) itself after hitting go another time while the last cue is being output.[/size]

I tried to delete color presets 1-30 with the command DELETE PRESET 1 THRU 30 -> ENTER and although the console asked if I want to delete 30 presets, it does nothing after pressing OK.
Best regards,
Edi