Posts: 2
Threads: 1
Joined: Jul 2022
Hello, everyone,
I am working with the ADJ FOcus Spot 6Z and the fixtures are not correct. I installed the latest version.
The instructions can be viewed at the following link:
http://adjmedia.s3-website-eu-west-1.ama...Manual.pdf
I would like to use the lamps in the highest channel mode.
Thank you!
Posts: 2
Threads: 1
Joined: Jul 2022
Specific errors:
The three channel modes are according to lamp 21,25,29.
In the fixture it is 20,24,20.
Sometimes the number doesn't match, so something must be wrong. Somehow the patched fixtures overlap when they are back to back.
Posts: 369
Threads: 10
Joined: Aug 2018
Hi, thanks! We'll look into this.
Posts: 16
Threads: 0
Joined: Jun 2023
Hello, many thanks! We'll investigate this.
bitlife
Posts: 6
Threads: 0
Joined: Jul 2022
Your writing demonstrates a high level of expertise
suika game and professionalism.
Posts: 1
Threads: 0
Joined: Feb 2024
This inconsistency could be causing issues, especially if the patched fixtures are overlapping when placed back to back.
geometry dash unblocked
To troubleshoot this issue, it's essential to double-check the specifications provided for both the lamps and fixtures. Ensure that the channel modes are correctly configured and aligned between the two components. Additionally, consider consulting the user manuals or technical documentation for the lamps and fixtures to confirm the correct channel modes and settings.
