14-01-2021, 10:17 AM
(This post was last modified: 14-04-2021, 02:42 PM by denishessberger.)
Type of the Desk: Lampy 20 with dongle
Software Version: 1.01
External Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen
Connected USB Devices: keyboard and mouse
Networked Devices: connected to LAN, DHCP
Description:
You cannot set fan for pan or tilt if you start from a position preset
Steps to reproduce:
- Select a few moving heads
- Select a position preset that includes pan and tilt values
- Press the fan button
- Select the Values home screen
- Now turn the Pan Fan encoder to fan the pan
Expected Behavior:
I would expect the pan to fan
Observed Behavior:
The pan does not fan initially. However, in the values screen, the tilt value changes from the preset to the raw value. If I then turn the Pan Fan encoder, the pan does fan. This bug only applies to the Pan Fan. If I change the Tilt Fan, it does work immediately.
Software Version: 1.01
External Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen
Connected USB Devices: keyboard and mouse
Networked Devices: connected to LAN, DHCP
Description:
You cannot set fan for pan or tilt if you start from a position preset
Steps to reproduce:
- Select a few moving heads
- Select a position preset that includes pan and tilt values
- Press the fan button
- Select the Values home screen
- Now turn the Pan Fan encoder to fan the pan
Expected Behavior:
I would expect the pan to fan
Observed Behavior:
The pan does not fan initially. However, in the values screen, the tilt value changes from the preset to the raw value. If I then turn the Pan Fan encoder, the pan does fan. This bug only applies to the Pan Fan. If I change the Tilt Fan, it does work immediately.