[Fixed in 1.02] Lampy 20, version 1.01, Encoders show fan options but cannot be set

[jjlinnemann]

Type of the Desk: Lampy 20 with dongle

Software Version: 1.01

Display Connected, is a touchscreen?: Yes, Dell P2418HT touchscreen

Connected USB Devices: keyboard and mouse

Networked Devices: connected to LAN, DHCP

Description: Fan options are indicated above the encoders, but cannot be set

Steps to reproduce:
- Select the Effects home screen
- Press the Fan button: the encoders now show fan options (like Grouping Fan, Direction Fan)

Observed Behavior:
If you have an effect set, parameters can be changed, but only by clicking the encoder and entering a value, not by turning the encoder. What you are changing are the effect parameters, however, not fan parameters.

[denishessberger]

Hi There,

I can not reproduce that parameters like size min, size max, speed and offset can not be fanned; however I can reproduce that duty cycle, grouping, symmetric, direction also show the "Fan" label and can not be changed when fan is active. This is a bug in the user interface in regards to trying to fan these parameters, however these parameters can not be fanned.
I'll issue a ticket (#161).

Thanks for reporting these findings with us!

Denis