Posts: 3
Threads: 1
Joined: Apr 2021
How can i create a setup using faders for speed rotation of Gobos. I have tried to create a cue.
1. Select Programming, Fixture then Gobo and Rotation to 255, then rec and then one of the left fader areas selected.
Maybe i am on the wrong way.
I have a chimp 300.
Can someone help me?
Posts: 369
Threads: 10
Joined: Aug 2018
08-04-2021, 10:54 PM
(This post was last modified: 08-04-2021, 10:54 PM by denishessberger.)
Hi there,
did you try changing the Fader Mode to Infade? You can do so by pressing the Edit Button, followed by one of the Buttons from the playback.
Posts: 3
Threads: 1
Joined: Apr 2021
Yes, but then the rotation will only switch between on and off
Posts: 369
Threads: 10
Joined: Aug 2018
Ah yes - then make sure the GoboRotation Channel is set to Fade in the Library of the fixture
You can do so by clicking on Setup, Fixture Library, select Show Library, select the Fixture Type, click on Edit in the Toolbar of the window.
Then look for the Gobo Rotation channel and double click into the Column that says “Snap”. Save the fixture type - and there you go ;-)
Posts: 3
Threads: 1
Joined: Apr 2021
Yeah, that worked
Great, thank you
Now I know too, how to create own fixtures.
Posts: 369
Threads: 10
Joined: Aug 2018
Glad to hear it worked
Posts: 1
Threads: 0
Joined: Nov 2022
I had the same problem and changed the Fader Mode to Infade. It worked. Thanks for the thread help.
