The overview in the fixture overview is very confusing because they are all packed one after the other. With many fixtures it quickly becomes obscure and you search for a long time if you don't know exactly which fixture number the fixture has. It would be great if you could place the fixtures freely like e.g. the groups in the group overview.

Sort DMX numerically in overview table.

it would be good if you could assign multiple universes for the hardware DMX outputs. I.e. that one e.g. Universe 1 could output on output A and B at the same time. Or with a 300 e.g. that you can patch universe 1 on output A, universe 1 on B, universe 2 on C and universe 2 on D.

Hi there, 

my Problem is when i connect an external Touch (Viewsonic TD 2423) to my Chimp 300 (2.05) it is not able to calibrate and sometimes the Resolution is smaller on the internal Screen. 
Sometimes after many Reboot it works. Sometimes not.

How can i fix the Problem? 
Many Thank´s

Chimp 100 Tour pack
Version 2.0.5
Off Dim FX arbeitet nicht in gespeicherten Cue 
Fixture Eurolight TMH-x4 im Zone Mode aus Chimp Bibliothek
Steps to reproduce
- ein Dim FX läuft auf den Geräten
- Geräte auswählen, im Programer auf Effekte gehen und Off DIM Effect wählen
- Effekt hört auf, dann dies in einen leeren Cue speichern und auf Exector legen
- Programmer clearen, FX läuft wieder
- Cue mit dem OFF FX starten aber DIM FX geht nicht aus
- das gleiche mit Bewegungen funktioniert jedoch wie es soll
LG Kai

Hey together,
i think i discovered a bug in the effect engine.
I tried to combine a Random Offset but it's not working.
Steps to reproduce:
Take an arbitrary selection of more than 2 fixtures.
Create a dimmer-effect type sine, buddys 2, offset random
Expected behaviour: the offset is random for the buddys
Visible: all fixtures are random without the influence of buddys.
Best regards
David

Lampy Fixture file for the Showtec Phantom 180 wash (14CH)

ps: make sure this file is copied in the folder: showtec\library\

Attached Files

  Showtec_Phantom180Wash(14CH).fixlib (Size: 1,65 KB / Downloads: 7)

As you can see in the video in the follow link ( https://drive.google.com/file/d/1JZxwttm...sp=sharing ) there is a bug while i'm trying to create an effect and replace the effect fixtures. 
Desk: Chimp 100G2 Tourpack
Software Version: 2.05
Step 1. Select Fixture (in my case is a multifixture)  
Step 2. Add a Dimmer Pulse Effect
Step 3. Deselect the 1st Module of multifixture
Step 4. Store the Selected fixtures into effect

now you will see that the first module is keeping the effect and dont release it even if you will clear the programmer. 
the only way to stop doing this is to reboot the console. 
i also tried to Restart User Interface ([Infinity] + [Open] + [S4]) but nothing changed.

Hey!

Is there a way to have two Monitors for the onPC Virtual Machine?

VMWare requires the installation of the VMWare tools to be able to get two monitors, but without root on the system that would be difficult to install.

Two monitors would be handy to have the Main Screen on one and the "physical" UI on the other.


Thanks!

Hi, I have a question
I have the Lampy 20
For a school

Have various lamps
1. Showtec Performer Fresnel 1500
2. Showtec ACT Profile 50ww
3. Showtec ACT PC 60 RGBW
4. Showtec ACT Fresnel 50 WW
5. Showtec PAR 18Q4
6. Beamz LCB 155 RGBWAUV

I created the fixture by myself because it was not in the fixture database
These 3 work´s
1. Showtec compact PAR 18Q4  
2. Showtec ACT Fresnel 50 ww
3. Showtec ACT Profiles 50 ww

Maybe someone has a fixture for the others
Lamps ??
1. Beamz LCB 155 RGBWAUV  (77 Channel Mode)
2. Showtec ACT PC 60 RGBW (11 Channel Mode )
3. Showtec Performer Fresnel 1500 (20 Channel mode )

I hope someone can help me
Best regards Sascha