Hello, is there a way to knockout a fixture in a playback? 
(I have a Lampy 20, 2 universes)
Bastiaan

Hi,

I would like to see that you can do more with the DMX-IN function, adress a cuelist oder an executer, for example like Midi.

Greats DJ

Polar 340 Wash (30CH mode)
 
A lot of Functions has been programmed under Specials
and Macro’s, due to the Multi-Dimmer/Color options of
this Fixture.
 
 
Function                                                                   CHIMP-Attribute
 
Channel 10 – Beam Color Macro’s  =                        COLOR MACRO
Channel 11 – Beam Static Pixel   =                            SPECIAL 1
Channel 12 – Beam Pixel effects =                           SPECIAL 2
Channel 13 - Beam Pixel Effects Speed =               SPECIAL 3
Channel 14 – Beam Zoom =                                        ZOOM
Channel 15 – Center RED =                                        SPECIAL 5
Channel 16 – Center Green =                                     SPECIAL 6
Channel 17 - Center Blue =                                         SPECIAL 7
Channel 18 - Center White =                                      SPECIAL 8
Channel 21 - Center Macros and Effects =             MACRO
Channel 23 - Ring Red =                                             FRAME 1A
Channel 24 - Ring Green =                                         FRAME 1B
Channel 25 –Ring Blue =                                            FRAME 2A
Channel 26 - Ring Color Macros =                           FRAME 2B
Channel 27 – Ring Color Effects =                            FRAME 3A
Channel 28 – Ring Color Effects Speed =               FRAME 3B
Channel 29 – Ring Dimmer =                                     FRAME MACRO

Attached Files

  USER_2021.03.26_11.58.59.fixlib (Size: 423 bytes / Downloads: 9)
  USER_2021.03.26_11.58.59.fixlib.zip (Size: 619 bytes / Downloads: 13)
  Polar 340 Wash.pdf (Size: 409,73 KB / Downloads: 8)

Hi there!
So glad to have this Chimp300. Before this, I was working on a LightCommander, and something is interesting on this one: if you don't know the physical patch, you can search your dimmer with the knob. It's very helpfull when the control room is far from the dimmer, and you don't know the light plot...

I can do differently with the Chimp, but not as soon as the LightCo.
It would be awesome on the Chimp to have this option! Or if you are a tip or a trick..
Thanks!!

peut on programmer  un preset position  choisi comme valeur par défaut pour éviter que les machines reviennent en position par défaut usine quand on vide le programmer lorsque l'on met un submaster off par exemple.
Cordialement

It would be good to have a command "ALL OFF- EXCEPT". You want to RELEASE(OFF) all Cuelists EXCEPT the Frontlights or others. Shift-OFF - Releases all even the Frontlight and Positions of the movingheads...or a command " Don't release if overwritten" would be great.

When you use a factory fixture, and you want to change (default) somthing, you have to programm the whole movinghead again (fixtures, color, beam, prism, position etc.) It would be so cool if we can change the fixture without programming the whole movinghead again....

Post body:

Type of the Desk: LAMPY 20

Software Version: 1.01

External Display Connected, is a touchscreen?: no

Connected USB Devices: none

Networked Devices: none

Description:

While patching my ETC Lustr 2 I noticed that it doesn't show the correct channel mode description. It seems like instead it shows the raw format in whatever format the fixture library is written in. 

Steps to reproduce:

Go to patch -> manufacturer library -> ETC -> Source Four LED Lustr 2 and look at the channel mode selection on the right.


Expected Behavior:

A readable selection of the available modes

Observed Behavior:

A rather cryptic selection of the available modes

Additional Information

I don't know if this is a restriction of the board (which would be a real shame and could be the killer for me) but the ETC Source Four LED Lustr 2 has an extra +7 channel mode that can be selected on top of any of the available DMX modes. [color=#000000][size=medium][font=Times New Roman]Essentially it's a direct colo[/font][/size][/color][color=#000000][size=medium][font=Times New Roman]r control instead of simulated RGB access. [/font][/size][/color]

This mode doesn't show while patching but would be great to have.

Post body:

Type of the Desk: LAMPY 20

Software Version: 1.01

External Display Connected, is a touchscreen?: no

Connected USB Devices: none

Networked Devices: switch and router / directly on router

Description:

After the first start I wanted to check for updates and tried to get the board connected to the internet.
I tried DHCP as  well as manual IP, had it on a unmanaged switch that is going to my router and even on the router directly. No luck.
It always says no connection, check cable (I tried two different cables, both work on my workstation)

Steps to reproduce:

Connect ethernet cable, try to online update software or fixture library


Expected Behavior:

A server connection

Observed Behavior:

No server connection

Additional Information

Post body:

Type of the Desk: LAMPY 20

Software Version: 1.01

External Display Connected, is a touchscreen?: no

Connected USB Devices: none

Networked Devices: none

Description:

When playing around with the board I turned off shutter in the cog wheel menu of my Cameo FC2s and the Software crashed. I had to cut the power to bring it back.

Steps to reproduce:

Go to Values, shutter and disable shutter.

Expected Behavior:

Not sure, but not a crash.

Observed Behavior:

Software crashes and freezes.

Additional Information

It's a fresh blank show file with 3 fixtures, no groups, no nothing.