Hi,

I made a tree step cuelist  (cue 6) and another 3 step cuelist (cue7) in the first cue of cuelist 6, I made a command a line to start cuelist 7 with go and it works, but how can I stop cuelist 7 ? 
I hope its possible to stop cuelist 7 with cuelist 6 at the same time. So if I start cuelist 6, it will also start cuelist 7 and when I stopped cuelist 6, it will stop cuelist 7 also. 
How to do?

Something we did just to use the keyboard in more feasible way.

Attached Files

Thumbnail(s)
               

I saw and hear at the training, at the earlier dealer days, you could get a "banana" usb stick, 
Fortunaly I missed it....... 

Will it be on the market again for sale?

Hi,

When I start up a saved show, all my programmed faders are rised up to 100% ( not  fysical, but the supper screenbar, shows in blue 100%), the output still remains zero.
I can only used a programmed fader, when I rise up the fader to 100% and then slide it back to 0, after that it will working normaly. 
What goes wrong?

Hi, 

Did someone noticed, that for example a pan/tilt effect engine "circle" , when you chose cw it will turn ccw and when ccw it will cw ? 
Or is my mistake and should it be seen from the fixture side and not from front?

Hy, 
how can I get the 48 Channel into the fixture Libary ?

If I try to create my own fixture i´m only able to get one time the color red green blue and white, 
I need it 12 times ....

Thank you.

Hi Chimp Users,

sometimes we receive a question which password to fill in to proceed with startup.
this should of course not be necessary.

when you get the ASROCK UEFI Setup Menu during startup, or during reboot (see attached picture)
then the mainboard sees an USB device connected, preventing it to boot the software from internal drive.

so when this happens to you, please unplug all USB devices such as keyboards, mouse, USB stick, smartphone charger cables etc and shutdown the console on the back with the power switch.
wait for 5 seconds and power up the console again.

problem solved  

Attached Files

Thumbnail(s)
   

Hi All,

Software version v1.05 now supports triggering from a MIDI-keyboard (on Midi-channel 1) with note on/off commands.


Midi Note on/off  #0-59: Executor Page 1-6 with 10 Executors each

Midi Note on/off  #60-91: Virtual Executor 1 - 32

Midi Note on/off  #100-102: Master Speed tapsync 1 - 3

Midi Note on/off  #103-105: Master Fade tapsync 1 - 3


*When you trigger the Executors or virtual-Executors you can select which function (Toggle On/Off, GO, GO+Off etc..)
(with EDIT-> Executor)


greetings,
Angelo

Attached Files

Thumbnail(s)
   

I had a chrash / freeze the chimp yesterday. the screens internally and externally only flicker and the chimp stops responding, see pictures. It only helped by keeping the main switch behind. the same thing happened a few weeks ago. in the moment there was no input or work on desk. chimp just stood there. 
is that a hardware defect? 

Attached Files

Thumbnail(s)
       

Hai all
Is it possible to keep a preset running, without it will stopped by clearing the proggrammer/ press 3 t7mes clear?

E.g.: I set my mh in a p/t preset position, In live I changed the color and gobo, now I will clear the color and gobo to default, but I wont't change my p/t position, or is this only possible to change the home position of the fixture?

So I had to change the home position in case my rig is different than usual?