Hello dear friends,

Im currently still working on my busking showfile. At the moment i am programming a "Bump menu"
Now i have the following question.

I have now programmed the following movement bump.

Cuelist X
      Cue 1    Fixture 1-10   intensity 100    tilt 180
                  Fixture 11-20  intensity 0       tilt 0

      Cue2     Fixture 1-10 intensity 0          tilt 0
                  Fixture 11-20 intensity 100     tilt 180

Cuelist X is then Triggered by another Cuelist with an empty cue with the CMD "Masterspeed1 Go"
 Everything is working fine so far.

But if im running a show the fixtures may be in use currently by a cuelist with say a movement effect.
To avoid any "ugly" transitions i would have to trigger a Cue with an off movement effect and pre position the fixtures in black to tilt 0 so when im toggle throu Cuelist X with my Masterspeed trigger the Movement is executed correctly.

I could use a CMD in CuelistX Cue1 to trigger a "pre position Cuelist", but then it would be executed everytime i trigger Cue1 with my Masterspeed.

Is there a way to insert a Cue in a Cuelist wich is only played once and the Masterspeed only toggels throu the second and third cue? Or any workaround with CMD to only trigger them once ?

Greetings from Austria 
Florian

Hi,
I noticed that sometimes when you add in the patch a new fixture, when you go back to "programmer" if you touch in the sceen "level" or "position" or "beam", then the chimp crash and restart whithout bad consequences for my work.
This doesn't happen every time so I don't have the exact sequence of touches to reproduce this bug.

Cordially

Hello everybody,
Im currently working on a busking file for my Chimp. Now i am running into a problem while using groups.
I have made a cuelist with cue 1 group1 @full and group2 @0 and cue2 group1 @0 and group2 @full.
This cuelist will then be used in my "bump menue" and is triggered by Soundmaster 1. Everything works so far but when i want to update the fixtures in group1 and group2 the cue dosnt get upgraded.
I thought groups would work simular to presets but if i change the content of the group the Cuelist i have used the group will not update to the new fixtures wich i have in the group.
Do i have missed something here ? or is there a work around ?
greeting 
Flo

hi
as i use Lampy in a theater, often i have a situation when i am in the need to patch more then one dimer to a channel. i updated the console and tried, still it delets the channel with it have conflict. is there a way to pach more then one dimer to a channel? or it is in future updates?
best regards from Serbia
Robi

Hello everyone,

I built a color picker with cues. If I now want to switch between the cues, I would like to do this with the GOTO command. Unfortunately, it always selects the first or last color directly without paying attention to the Assert commands. Can you help me ?

Would it be possible tho get a macro page were you can create custom comands like replace cuelist 1 with cuelist 2.

Hi,
In the new update 2.21 as in the oldest :
I like to have my front lights @100% in fader 1, back lights @100% in fader 2 and so..In order to build rapidly my scenes.
but if I want to build a cue with for ex. front light @50% and back lights @80%, if I put the fader1 @50 and the fader 2@80% and I record that in record "content output" mode on a new cue,
chimp doesn't take care of the levels of the faders and the result is : front and back lights @100  )-:
Why? Is there a way to do what I want?

-------------------------------------------------------------------------------
Version 2.21
-------------------------------------------------------------------------------

*** New Features ***

- Implement Cuelist Pause functionality without back (Fader-Button, MIDI, DMX In, Cuelist Commands, Virtual Executors)
- Implement Tap Speed for Effects.
  - Effects are still syncronized to the global synchronization and not to the tap itself, however the effect speed is now calculated as a rate based on 60 BPM. This behaviour is as such to make sure effects in the same cue with different speeds are still in synchronity. Also, in order to tap your effects accurately to the speed, they **must** be programmed at a speed of 60 CPM. If an effect is programmed with 30 CPM, it will run with half the speed of the tapped speed.
  - In order for a cuelists effect tap button function to work, the fx speed master settings of the cuelist need to be set to "Local BPM". Alternatively you can use a FX Speed Master.
  - The Cuelist's "FX Speed" Fader function scales any speed, either set by BPM locally or through a master relatively to such. Ie. The FX Speed master is set to 50% and the local FX Speed is set to 50%, then the resulting effect will run at 25% of its programmed speed.
- Implement FX Speed Master Settings in Timing Menu
  - An FX Speed Master can now be absolute (BPM) or relative (0-100%)
  - Absolute FX speed masters have a configurable minimum and upper bound
- Added a Patch Import function to import Fixture Patches via a CSV file (infinity/patch_import_export on the USB Stick)
- Added "Appearance" Command for Special Masters
- Amount of Release Groups has been increased to 20
- Updated Qt to 6.4.3
- Updated Boost to 1.7.9

*** Changes ***

- Patch Export Folder on USB Stick has been changed from infinity/patch_export to infinity/patch_import_export

*** Bugfixes ***

- Library: CIE Intensity and HSI Intensity default should be 100%
- Library: CIE xy default should be D65 white
- F_MINT is not used in virtual Dimmer function
- Show Default Timings are not saved / recalled in showfile
- Gobo4 Rotation is falsely mapped to Gobo3 Rotation
- Make chimp Showpartition RW at all times
- Some multicell fixtures had wonky patch behaviour (ie. American DJ Jolt 300 was always patched to universe 1, channel 13)
- Fixed a text length limitation in range representation editor
- Elements recorded using “All for Selected” and “All Values” do not include programmer content
- Snake Predefined Effect inserts a Tilt effect twice
- Fixed an issue where the patch of certain fixtures changed after re-opening a showfile (I.e. ADJ Mega Bar LED)
- Fixed a crash when opening the Record Content Menu in the record toolbar for the second time
- Fixed Effect Editor Ramp Up / Ramp Down icons not matching the button description

would like to request the fixture-file for the JB-lighting P10 Mode2 profile

Type of the Desk: CHIMP 100G2 + banana

Software Version: 2.1

External Display Connected, is a touchscreen?: 2 touchscreens

Connected USB Devices: no

Networked Devices: yes
Hy,
When I try to update the fixture library on the latest version,by network , at the "verifying checksum....." step all the keys goes off and chimp said "whoops! It looks like the server crashed.." and i need to reboot...!
How can I solve this?
Where can we download the file with the lastest version of the library fixture for updating by USB?

Cordially