When will there be an updated Manual for all the new features since V1.03?

This should be mandatory for a product placed as a flagship product.

I would welcome if there were an output window so you don't have to use an external tool like ArtNetominator.

I've received a tourpack with version 1.08. Banana wing is connected and working but when I look in setup menu at the outputs DMX universe 3 and 4 are shown as Disabled.
Seems if wing has not unlocked the additional universes.

May this be a software bug?
Any hints?

When editing a fixture, currently the min value of a new range is suggested with the max value from the last defined range. It would be much more comfortable if the min value suggestion would be increased by 1.

Tested on software version 1.08

I added a Prolights Diamond 19 fixture to my show in "standard mode". When you edit the fixtures DMX range on channel 8 (CTC) you can see range names that are much longer than you are able to write them yourself on the console. Is this a wrong limitation? Because I would like to be able to specify range names as long as they come with the Atlabase library.

Version 1.08 (15-01-2019)
---------------------------------------------------------------------------
This is a hardware maintenance release.

Improvement/Additions:
- Updated order of alignment buttons in magic sheet editor
- Updated operating system to support new Chimp 100/300 hardware generation.

The Fixture Library has been updated to the latest AtlaBase Library as of 15.01.2019

When you have a Cuelist 1 with several Cues and hit "Load Cuelist 1 Enter" the "Select Cue" window opens. There it should be possible so scroll through the Cues with Wheel 1.
This does not work.

Tested on version 1.08

Update:
It seem's that the "Scroll table" function in general only moves the vertical scroll bar when the list is longer than the window is able to show. I've also recognized this when editing a fixture wher you set a lot of ranges for one channel. It would be great if the scrolling with the wheel would move the selected line which can be edited when the wheel is pressed (= SET / ENTER)

Software Version 1.08

Selecting keyboard layout to German does not work. On a QWERTZ keyboard the Z is still represented as a Y. Also the changed keyboard layout is not saved. When you move back to the setup page from e.g. The programmer the English (US) layout is selected again.

Hi,

When will come the new software release with the new effect from the Chimp Challenge?

King regards,
Jimmy

[size=small]need urgent help![/size]
Can’t play donkey long with my new banana wing!
??
We want to have fun after programming!