Ist es möglich den DMX IN nicht nur dazu zu nutzen die DMX Werte auf ein Universum zu mergen, sondern damit auch die Fader vom Pult zu steuern und dadurch eine einfaches DMX Pult als Fadererweiterung zu nutzen???

Mfg Kai

Ich habe aus der Fixture Bibliothek den GLP Ypoc 575 Pro in den User bereich kopiert um dort Default werde anzupassen, da in der Originalen unsinnige Default Werte bei der Iris ein getragen sind und auch andere Default werte für PAN benötige. Ich kann die Werte ändern, es wird aber nicht gespeichert. Bei anderen Fixtures funktioniert es, aber nicht beim YPOC 575 Pro 

Mfg Kai

Ich Haben eine 24ch DMX Pult an den DMX D angeschlossen und DMX IN aktiviert. Es werden mir aber keine ankommenden Signale im Fenster des DMX In angezeigt. Bin ratlos wo das Problem ist.

Mfg Kai

Ich haben einen iiyama PROLITE T2252MTS an einer Chimp300 angeschlossen, wird aber nicht erkannt. Ich habe nicht mal ein Bild auf dem Monitor.

mfg Kai

Hello all,

will the bananawing connected by USB to the chimp 300 ?

if yes and i connect a second touchscreen with USB to the chimp 300.....

am i missing an USB connector then ?
So i have to use a USB hub ?
The idea should be NOT to have too much single parts flying around like an USB hub....

greetz
Sascha

Hello all,

i have an elo touch display with 1440x900 resolution and when i connect it to the chimp 300 it will detected as 1440x900 which is fine........but the windows of chimp OS are overlaping and i cant use the system like this.

Is it only possible with an 1920x1080 display or do you find a way to recalculate the windows on different resolutions of a second screen ?

greetz
Sascha

Hello all,

with an open channelset window like gobo or fixed colorwheel the full button set this parameter to 255.

for example youu have gobo window open....then you remember your fixtures are still dim closed and you press FULL will set gobo channel to 255 which is wrong. FULL should always only be connected to dim value.

greetz
Sascha

Hello all,

Clear button should work as follow :

1.  clear = clear selection
2. clear = clear programmer (red for store)
3. clear = clears values back to default or executer value


greetz
Sascha

Hello all,

would be great to have groupmasters on fader also possible with fetchmode and NOT disapear by page change.

Greetz
Sascha

Hi all, 
with this post I would like to share some general hotkeys which makes life more easy for all of us:
[size=small][Infinity] + [Open] + [S1] = start calibrating internal screen (or first screen)[/size]
[Infinity] + [Open] + [S2] = start calibrating external screen (or second screen)
[Infinity] + [Open] + [S4] = restart the GUI interface.
[Infinity] + [Open] = closing the currently active Window on the internal
[Infinity] + [Page Up] = takes you back to fader or executor page 1
[Infinity] + [Off] = Release all Cuelists, clear Programmer and reset all Fader values back to 100%
[Off] + [Cuelist] xx = Release Cuelists xx
[Infinity] + [Preset] = Copy Preset contents for all selected fixtures to programmer instead of linking to preset
[Infinity] + [Clear] = Will revert back to the last programmer state (Unclear Programmer)
[Infinity] + [Last] = Will deselect all fixtures
[Infinity] + [Next] = Will select all fixtures (of the current selection set, if applicable)
Hold [Infinity] Will show fine values in programmer and allows for fine adjustment of parameters using the encoders.
Hold [Fan] key automatically switches off the fan when button is released
[Infinity] + [Load] is a hotkey to load the current output on stage of the selected fixtures into the programmer. This function is similar to the record “All for Selected” function, but it doesn't store the result into a Cue. Instead it loads the result into the Programmer for further editing.

Dimmer shortcuts on the number block:
[@] [Full] = dimmer to 100%
[Full] = dimmer to 100%
[@] [@] = dimmer to 100%
[@] 75 = dimmer to 75%
[@] [.] 75 = dimmer to DMX value 75
[+] [+] = increase dimmer by 10%
[-] [-] = decrease dimmer by 10%
[.] [.] = dimmer to 0%